ehardware

 

Accept Paypal / Credit Card Payment For Total Amount Order More Than MYR 100.00 For All Buyer

Accept Bank Transfer / ATM Card Transfer / Bank In Cash For Any Amount For Malaysia Buyer

Double Headed Sheet Metal Cutting Nibbler



Power Drill Convert To Metal Cutter Nibbler & Saw Attachment (YT-180A)

  • Condition: New
  • It works as an adopter for any Electric / pneumatic drill machine to cut most sheet metal, plywood, block- wood, fiber sheet, plastic block sheet etc in any desired shape and profile.
  • Each blade from both sides is re-usable and cutting edge can be sharpening up to 9-10 times.
  • Easy to use with your standard household universal chuck power drill / cordless drill
  • Jigsaw blade can be use same as standard electric jigsaw blade
  • It provides 2 types of cutting methods : 1) Jigsaw Cutting 2) Nibbling Cutting

Specification

  • 360 degree changeable direction at operation
  • Power Source-electric or pneumatic drill should be 8mm chuck and speed of 1,500 to 3,000RPM
  • This tool will cut intricate patterns without leaving burrs and sparks in Steel, Iron, Copper, Aluminum & Plastics

Thickness for nibbler cutting is as follows:

  • Ordinary steel plate-----------1.6mm
  • Stainless steel sheet-----------1.2mm
  • Copper sheet-----------------2.0mm
  • Aluminum sheet---------------2.0mm
  • Plastic sheet------------------2.0mm
  • Fiberboard-------------------2.0mm

Set Contents:

  • 1 x Attachment YT-180A (Installed Nibbler and Wood Saw blade)
  • 1 x Handle Fitting For Saw Side
  • 1 x Spare Nibbler Blade
  • 1 x Spare Nibbler Blade Holder
  • 1 x Steel Saw Blade
  • 1 x Hex Key Wrench
  • 1 x Plastic Handle
  • 1 x Metal Storage Case

一、产品特点及用途
新型双头薄板切割器是经过多次改进的第三代国家专利产品,是一种以电、气钻为动力的切割工具,它可以双头切割2毫米以下的金属薄板(包括钢板,铜板,铝板,不锈钢板)当一头切割变钝时可换另一头继续切割,无论切割颊还是曲面,都能得心应手地切割出各种直线,曲线,圆弧或其它不规则线条和形状。当配上薄板开孔器后可切割55毫米-260毫米的标准圆孔。本产品具有重量轻,体积小,操作简便等特点,是汽车修理,钣金制作及新产品开发的理想工具。

二、操作要求及配件更换方法
1 刀头刀刃处勤加油,特别是切割铝板尤为重要。
2 先开电钻,后切割,结束时先退出后关电钻。
3 切割时刀杆的切口必须与被割工件保持垂直,以防硬蹩折断刀头。
4 刀杆更换:打开护盖,取出防松螺帽,松开紧定螺丝,用钳子拔出刀杆,重新装上刀杆,柠紧螺丝即可。
5 刀座更换:逆时针旋出压紧帽,换上新刀座即可。

三、薄板开孔器使用说明
1 当配用薄板开孔器时,首先将电钻前端和切割器,插入开孔器的圆孔内,使切割器与电钻连接并将其锁牢,再将架子上的三枝,柱头螺丝柠紧,以防开孔器架子滑动;将尺杆以左到右定位针朝上插入架子的小方孔内,最后可根据所割圆弧的大小,调节并拧紧紧顶螺杆,将尺杆固定牢,以保切割圆孔的准确性。
2 切割标准圆弧时,应使用薄板开孔器,以保圆弧切面光滑漂亮,还应在工作上先钻一个3毫米的定位眼,再钻一个12毫米的孔,将刀头伸入孔内进行内外圆的切割。

包装实拍:

技术参数:
1、有两只刀头可调头切割
2、刀头可任意方向360度定位
3、选配8mm电动或气动钻,转速1500-3000转/分
4、最小切割半径12mm
5、允许切割厚度

普通铁板:1.6mm

不锈钢板:1.2mm

铜、铝板:2mm

塑料胶合板车:2mm

SYQCGHDCGHDCDGH1.2KGQVDHGCHGDCHQLKA

Write a review

Please login or register to review

Power Drill Convert To Metal Cutter Nibbler & Saw Attachment (YT-180A)

  • Product Code: YT-180A
  • Availability: 17
This item has been sold: 3 times
  • MYR 149.00


1858 Page Views

0 reviews / Write a review


Related Products

Tags: YT-180A YT-160A